This guide will walk you through how to print a configuration page from a Cloud Printer.
Ensure that the printer is powered on
- Turn off the printer by pressing the power button and wait at least 5 seconds.
- Simultaneously press and hold the “Feed” and "Power" buttons shown on the front control panel. Immediately let go of the power button once the printer has powered on and continue to hold the feed button till the printer prints out 3 total configuration pages. This should take about 20 seconds.
- Ignore the first two and keep the one that shows an IP address and the very bottom of the page. If the IP address shows 0.0.0.0 please reach out to campus IT to check the connection of the port.
Ignore:
Keep:
Note: Please make sure the picture is clear and easy to read.